Dear all,
I was trying to add a 3d barrier inside the stirring tank. However, I'm not familiar with the rotating machinery. I don't know how to set up the boundary condition for the new barrier. The original stirring tank's file was downloaded from the comsol application gallery. I also found out that even I changed the number of baffles into zero. There's still one baffle left.
The original file is here: www.comsol.com/model/modular-m...turbulent-mixing-k-omega-16903
(modular_mixer.mph)
1. How to set up the boundary condition for the new barrier.
2. How to eliminate all the baffles.
Thank you
I was trying to add a 3d barrier inside the stirring tank. However, I'm not familiar with the rotating machinery. I don't know how to set up the boundary condition for the new barrier. The original stirring tank's file was downloaded from the comsol application gallery. I also found out that even I changed the number of baffles into zero. There's still one baffle left.
The original file is here: www.comsol.com/model/modular-m...turbulent-mixing-k-omega-16903
(modular_mixer.mph)
1. How to set up the boundary condition for the new barrier.
2. How to eliminate all the baffles.
Thank you